|
|
Gas Fires Direct UK - ELECTRIC FIRE RANGE - “ DIMPLEX ” Range |
|
|
Real open fires can be inconvenient and messy, with ash to clear, fuel to store and chimneys to clean. If you do not have natural gas or LPG, then the alternative has to be an electric fire.
|
Gas Fires Direct UK stocks a large range of Dimplex Electric Fires. Dimplex Electric Fires are are 100% efficient at point of use, as all the heat produced goes into the room. |
(All Dimplex fires are approved by BEAB or awaiting approval at date of publishing.) |
|
The unique Optiflame® effect amazes everyone who sees it! - The “flames” can also be used independently of the heating, so you can enjoy the cosiness of the flames without worrying about overheating the room – ideal for those dark but mild spring and autumn evenings. With a Dimplex electric fire there is no need to worry about any annual maintenance, and for extra peace of mind all Dimplex fires are BEAB approved*, which means they have been produced to the stringent safety requirements for domestic electrical appliances.
|
|
All fires come complete with a fitted plug, so they can be used wherever there is a 13amp socket nearby – many do not even require a fireplace! – and can be moved from room to room, or house to house. Whatever your taste – ultra modern, traditional or classic, Dimplex has a fire to suit your décor and lifestyle.
|
|
|
|
The Aspen
A contemporary fire with brushed stainless steel finish and choice of pebbles or coal. An Inset fire with unique Optiflame® Plus effect and designed to fit 16" and 18" fireplaces and all conventional flues. There is a choice of 1kW or 2kW fan heat settings. The chassis allows the fire to be fully inset where flue allows with minimal projection into room, or “flat-wall fixed” (semi-inset) using spacer provided and with a suitably rebated surround. The fire can also be made free standing using optional spacer kit. Inset depth of only 55mm. This fire comes with both pebbles and coal and is finished in stainless steel with brass effect trim.
|
The Aspen
|
£269 (VAT Included)
|
|
|
|
|
 Specifications ( Adobe Acrobat File)
|
|
|
|
|
The Avola
A contemporary fire with brushed stainless steel finish and choice of pebbles or coal. An inset fire designed to fit standard 16" and 18" fireplace openings and conventional flues. It is fitted with the Unique Optiflame® Plus effect and comes with both pebbles and coal. Choice of 1kW or 2kW fan heat settings. The chassis allows the fire to be fully inset where flue allows with minimal projection into room, or `flat-wall fixed` (semi-inset) using spacer provided and with a suitably rebated surround - inset depth of only 55mm. Finished in brushed stainless steel finish.
|
The Avola
|
£269 (VAT Included)
|
|
|
|
|
Specifications ( Adobe Acrobat File)
|
|
|
|
|
The Elda
A contemporary fire with brushed stainless steel finish and coal fuel bed. An inset fire with unique Optiflame® effect supplied with real coals and pebbles. This fire is designed to fit standard 16" and 18" fireplace openings and all conventional flues. Available with a choice of 1kW or 2kW fan heat settings. The chassis allows the fire to be fully inset where flue allows with minimal projection into room or `flat-wall fixed` (semi-inset) using spacer provided and with a suitably rebated surround. The fire can also be made free standing using optional spacer kit. Finished in brushed stainless steel with an inset depth of only 50mm.
|
The Elda
|
£199 (VAT Included)
|
|
|
|
|
Specifications ( Adobe Acrobat File)
|
|
|
|
|
The Wynford
A simple design available in 3 finishes - chrome effect, brass effect or black. The Wynford is an inset fire and comes with a 2kW fan heater located in the canopy and Optiflame® coal effect, with real coal, which can be operated without heat. It is designed to fit 16" and 18" fireplaces with a choice of 1kW or 2kW heat settings. The controls are concealed under the canopy. The Wynford can be fully recessed or `flat wall fixed` using spacer provided and a suitably rebated surround (product is not freestanding). A 60mm spacer provided (spacer will not make product freestanding). Can be made freestanding using optional spacer kit WYN001.
|
The Wynford
|
£135 (VAT Included)
|
|
|
|
|
Specifications ( Adobe Acrobat File)
|
|
|
|
|
The Horton
A traditional fire available in 3 finishes - chrome effect, brass effect or black. An inset fire that fits standard 16" and 18" fireplace openings, all conventional flues and can be flat wall fixed with a suitable fire surround (using spacer provided). The chassis allows the fire to be fully inset with minimal projection into the room where flues allow. The Horton is fitted with the Unique Optiflame Plus® effect with real coals for added authenticity. Lastest technology gently circulates heat from the fan heater hidden within the canopy. 1kW or 2kW heat output plus thermostat control. All controls are cleverly concealed under the canopy which hinges forward for ease of use. Inset depth of only 55mm.
|
The Horton
|
£269 (VAT Included)
|
|
|
|
|
Specifications ( Adobe Acrobat File)
|
|
|
|
|
The Brayford
A value for money compact stove.
The Brayford is a compact stove designed to fit in or on a standard fireplace and hearth, fitted with Optiflame® log effect. There is a choice of 1kW or 2kW heat selection.
Black cast effect finish.
|
The Brayford
|
£105 (VAT Included)
|
|
|
|
|
Specifications ( Adobe Acrobat File)
|
|
|
|
|
The Club
A mid-sized cast iron style electric stove with controls concealed behind the opening door. This stove is fitted with Optiflame® log effect with the illusion of `dying embers` even when switched off. There is a choice of 1kW or 2kW fan heat output.
Finished in matt black and compatible with stove pipe accessory STP001.
|
The Club
|
£159 (VAT Included)
|
|
|
|
|
Specifications ( Adobe Acrobat File)
|
|
|
|
|
The Rectory
Cast-iron `style` stove finished in black with a choice of unique Optiflame® Plus flame effect with real coals or Optiflame® Elite flame effect. This stove comes fitted with log fuel effect - just change to coal as appropriate. It has 1kW or 2kW heat selection, an opening door and thermostat control. The remote control gives armchair selection of on/off heat output and flame effect light levels. Compatible with stove pipe accessory STP001.
|
The Rectory
|
£249 (VAT Included)
|
|
|
|
|
Specifications ( Adobe Acrobat File)
|
|
|
|
|
The Montana
A cast-iron `style` stove finished in black with the choice of the unique Optiflame® Plus flame effect with real coals or the Optiflame® Elite flame. Comes fitted with log fuel effect - just change to coal as appropriate. It has 1kW or 2kW heat selection, an opening door and thermostat control. The remote control gives armchair selection of on/off heat output and flame effect light levels. Compatible with stove pipe accessory STP001.
|
The Montana
|
£249 (VAT Included)
|
|
|
|
|
Specifications ( Adobe Acrobat File)
|
|
|
|
|
The Springborne
A cast-iron `style` stove finished in black with a choice of unique Optiflame® Plus flame effect with real coals or Optiflame® Elite flame. The Springborne comes fitted with log fuel effect - just change to coal as appropriate. It has 1kW or 2kW heat selection, an opening door and thermostat control. The remote control gives armchair selection of on/off heat output and flame effect light levels. Compatible with stove pipe accessory STP001.
|
The Springborne
|
£129 (VAT Included)
|
|
|
|
|
Specifications ( Adobe Acrobat File)
|
|
|
|
|
The SP 1 Remote
An elegant combination of crisp lines and sweeping curves. The SP1 is a contemporary flame effect fire designed for wall mounting. It has a multi function, remote control and the unique Optiflame® Elite effect. Finished in satin silver effect with a fully concealed 2kW fan heater with remote and manual switching. There is a choice of 1kW or 2kW heat settings. The flame effect can be used independently of heat source. Wall mounted only (cannot be recessed).
|
The SP1 Remote
|
£489 (VAT Included)
|
|
|
|
|
Specifications ( Adobe Acrobat File)
|
|
|
|
|
The SP 2 Remote
With minimalist styling creating a simple yet highly dramatic effect, this fire is finished in satin silver. A contemporary flame effect fire designed for wall mounting. There is a multi function, remote control which operates the unique Optiflame® Elite flame effect. There is a fully concealed 2kW fan heater with remote and manual switching with a choice of 1kW or 2kW heat settings. The flame effect can be used independently of heat source.
Wall mounted only (cannot be recessed).
|
The SP2 Remote
|
£489 (VAT Included)
|
|
|
|
|
Specifications ( Adobe Acrobat File)
|
|
|
|
|
The SP 3 Remote
A fusion of angular surfaces creating a powerful design statement. A contemporary flame effect fire designed for wall mounting with multi function, remote control and the unique Optiflame® Elite flame effect. Finished in satin silver effect with a fully concealed 2kW fan heater with remote and manual switching. There is a choice of 1kW or 2kW heat settings. The flame effect can be used independently of heat source.
Wall mounted only (cannot be recessed).
|
The SP3 Remote
|
£490 (VAT Included)
|
|
|
|
|
Specifications ( Adobe Acrobat File)
|
|
|
|
|
The SP 4 Remote
With satin silver effect finish and `smart` heated glass, this fire provides a perfectly balanced mix of sleek styling with state-of-the-art technology. A contemporary flame effect fire designed for wall mounting with multi function, remote control and the unique Optiflame® Elite fire effect. The flame effect can be used independently of heat source. The surround is finished in satin silver with the unique `smart` heated glass. Silent heating operation.
|
The SP4 Remote
|
£849 (VAT Included)
|
|
|
|
|
Specifications ( Adobe Acrobat File)
|
|
|
|
|
The SP 8 Remote
New for 2004, a contemporary flame effect fire designed for wall mounting and with remote control giving armchair selection of on/off heat output and flame effect light levels. Fitted with Optiflame® large white pebbles as standard, the log bed is available as an optional extra (model SP800L). In silver finish with contrasting grey, the SP8 has a fully concealed 2kW fan heater with remote and manual switching - choice of 1kW and 2kW fan heat settings. Flame effect can be used independently of heat source. Wall mounted only (cannot be recessed).
|
The SP8 Remote
|
£349 (VAT Included)
|
|
|
|
|
Specifications ( Adobe Acrobat File)
|
|
|
|
|
